View MGA-31816-BLKG_7072491.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

mga-31816 0.1 w high linearity driver amplifi er data sheet description avago technologies mga-31816 is a high linearity driver mmic amplifi er housed in a standard qfn 3x3 16 lead plastic package. it features high gain, low operating current, good noise fi gure with good input and output return loss. power consumption can be further reduced by reducing the quiescent bias current using two external bias resistors. the device can be easily matched at diff erent frequencies to obtain optimal linearity performance at those frequencies. mga-31816 is especially ideal for 50 ? wireless infrastruc- ture application operating from 1.5 ghz to 4 ghz frequency range applications. with the high linearity, excellent gain fl atness and low noise fi gure the mga-31816 may be utilized as a driver amplifi er in the transmit chain and as a second stage lna in the receiver chain. this device uses avago technologies proprietary 0.25 ? m gaas enhancement mode phemt process. pin connections and package marking notes: package marking provides orientation and identifi cation 31816 = device part number yyww = work week and year of manufacturing xxxx = last 4 digit of lot number features ?? very high linearity at low dc bias power [1] ?? high gain with good gain fl atness ?? good noise figure ?? rohs compliant ?? halogen free ?? advanced enhancement-mode phemt technology ?? qfn 3x3 16-lead standard package ?? lead-free msl1 specifi cations at 1900 mhz, v dd = 5 v, i dd = 59 ma (typ) @ 25 c ?? oi p3 = 40.5 dbm ?? noise figure = 1.6 db ?? gain = 19.5 db ?? p1db = 20.5 dbm ?? irl = 16.5 db, orl = 10.6 db note: 1. the mga-31816 has a superior lfom of 15.8 db. linearity figure of merit (lfom) is essentially oip3 divided by dc bias power. attention: observe precautions for handling electrostatic sensitive devices. esd machine model = 60 v esd human body model = 300 v refer to avago application note a004r: electrostatic discharge, damage and control. figure 1. simplifi ed application circuit 31816 yyww xxxx nc 12 rfout 10 nc 9 rfout 11 1 nc 3 rfin 4 nc nc - not connected 2 nc vbias 16 nc 14 vd 13 vctrl 15 5 nc 7 nc 8 nc 6 nc gnd top view bottom view rfout biasing network rfin vbias vctrl vdd
2 table 1. mga-31816 absolute maximum rating [1] (t a = 25 c) symbol parameter units absolute maximum v dd, max drain voltage v 5.5 v bias, max bias voltage v 5.5 v ctrl, max control voltage v 5.5 p d power dissipation [2] mw 605 p in cw rf input power dbm 24 t j junction temperature c 150 t stg storage temperature c -65 to 150 t amb ambient temperature c -40 to 85 thermal resistance thermal resistance [3] (v dd = 5.0 v, t c = 85 c) ? jc = 65.8c/w notes: 1. operation of this device in excess of any of these limits may cause permanent damage 2. source lead temperature is 25 c. derate 15.2 mw/c for t l > 126.0 c. 3. thermal resistance measured using 150 c infra-red microscopy technique. table 2. mga-31816 electrical specifi cation [1] t c = 25 c, v dd = 5.0 v, unless noted symbol parameter and test condition frequency units min. typ. max. i ds quiescent current 1900 mhz 2600 mhz 3500 mhz ma 37 59 61 59 83 nf noise figure 1900 mhz 2600 mhz 3500 mhz db C 1.6 1.6 1.8 2.4 gain gain 1900 mhz 2600 mhz 3500 mhz db 18 19.5 18.8 18.5 21 oip3 [2] output third order intercept point 1900 mhz 2600 mhz 3500 mhz dbm 37 40.5 42.0 41.3 C lfom [2, 3] linearity figure of merit 1900 mhz 2600 mhz 3500 mhz db C 15.8 17.3 16.9 C p1db output power at 1db gain compression 1900 mhz 2600 mhz 3500 mhz dbm 19 20.5 19.8 19.3 C pae power added effi ciency at p1db 1900 mhz 2600 mhz 3500 mhz % C 38.2 31.6 29.9 C irl input return loss 1900 mhz 2600 mhz 3500 mhz db C 16.5 22.9 21.1 C orl output return loss 1900 mhz 2600 mhz 3500 mhz db C 10.6 10.0 11.4 C isol isolation 1900 mhz 2600 mhz 3500 mhz db C 25.7 26.5 28.1 C notes: 1. measurements obtained from test circuits detailed in figures 46 and 47 and table 3. 2. oip3 test condition: f1 C f2 = 1 mhz, with input power of -13 dbm per tone measured at worst case side band. 3. lfom is defi ned as lfom = oip3 (in dbm) C p dc (in dbm). it is a measure of the linearity of an amplifi er per unit of dc power consumed. 4. demoboard tuned to best oip3 with minimum over temperature drift.
3 mga-31816 consistency distribution chart [1, 2] figure 2. i dd @ 1900 mhz; lsl = 37 ma, nominal = 59 ma, usl = 83 ma figure 4. gain @ 1900 mhz; lsl = 18 db, nominal = 19.5 db, usl = 21 db figure 5. oip3 @ 1900 mhz; nominal = 40.5 dbm, lsl = 37 d bm figure 3. nf @ 1900 mhz; nominal = 1.6 db, usl = 2.4 db figure 6. p1db @ 1900 mhz; nominal = 20.5 dbm, lsl = 19 dbm notes: 1. data sample size is 4000 samples taken from 4 diff erent wafers and 2 diff erent lots. future wafers allocated to this product may have nominal values anywhere between the upper and lower limits. 2. measurements are made on production test board which represents a trade-off between optimal gain, nf, oip3 and op1db. circuit losses have been de-embedded from actual measurements. 40 50 60 70 80 1.6 1.8 2 2.2 2.4 1.4 38 40 42 44 46 48 19 18 20 21 lsl usl usl lsl usl lsl 19 20 21 22 lsl
4 mga-31816 typical performance data for 1.9 ghz t c = 25 c, v dd = 5.0 v, i dd = 59 ma (based on bom in table 3, tuned for optimal linearity with over temperature) figure 7. oip3 vs pin and temperature figure 8. oip3 vs frequency and temperature figure 9. gain vs frequency and temperature figure 10. irl vs frequency and temperature figure 11. orl vs frequency and temperature figure 12. isolation vs frequency and temperature 16 17 18 19 20 1600 1700 1800 1900 2000 2100 2200 frequency (mhz) gain (db) -40 -38 -36 -34 -32 -30 -28 -26 -24 -22 -20 -18 -16 -14 -12 -10 -8 1600 1700 1800 1900 2000 2100 2200 frequency (mhz) input return loss (db) -18 -17 -16 -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 1600 1700 1800 1900 2000 2100 2200 frequency (mhz) output return loss (db) -29 -28 -27 -26 -25 -24 1600 1700 1800 1900 2000 2100 2200 frequency (mhz) isolation (db) 31 32 33 34 35 36 37 38 39 40 41 42 -20 -19 -18 -17 -16 -15 -14 -13 -12 -11 -10 -9 -8 -7 pin (dbm) oip3 (dbm) 31 32 33 34 35 36 37 38 39 40 41 42 43 1600 1700 1800 1900 2000 2100 2200 frequency (mhz) oip3 (dbm) 25 c -40 c 85 c 25 c -40 c 85 c 25 c -40 c 85 c 25 c -40 c 85 c 25 c -40 c 85 c 25 c -40 c 85 c
5 mga-31816 application circuit data for 1.9 ghz t c = 25 c, v dd = 5.0 v, i dd = 59 ma (based on bom in table 3, tuned for optimal linearity with over temperature) figure 13. p1db vs frequency and temperature figure 14. noise figure vs frequency and temperature figure 15. current vs voltage and temperature figure 16. oip3 and quiescent current with diff erent r1 [1] figure 17. oip3 and quiescent current with diff erent r2 [1] note: 1. vbias and vctrl can be externally controlled by change external biasing resistors r1 = rbias and r2 = rctrl (as shown in fig . 46). 39.0 39.5 40.0 40.5 41.0 41.5 42.0 r1 ( : ) oip3 (dbm) 52 54 56 58 60 62 64 idd (ma) 680 750 820 910 1000 0 10 20 30 40 50 60 70 80 90 1.0 1.4 1.8 2.2 2.6 3.0 3.4 3.8 4.2 4.6 5.0 5.4 vdd (v) idd (ma) 18.7 18.9 19.1 19.3 19.5 19.7 19.9 20.1 20.3 20.5 20.7 20.9 21.1 1600 1700 1800 1900 2000 2100 2200 frequency (mhz) p1db (dbm) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 1600 1700 1800 1900 2000 2100 2200 frequency (mhz) noise figure (db) 25 c -40 c 85 c 25 c -40 c 85 c 25 c -40 c 85 c oip3 at r2 = 1000 : current at r2 = 1000 : 39.0 39.5 40.0 40.5 41.0 41.5 42.0 820 910 1000 1100 1200 r2 ( : ) oip3 (dbm) 54 56 58 60 62 64 66 idd (ma) oip3 at r1 = 820 : current at r1 = 820 :
6 mga-31816 application circuit data for 1.9 ghz t c = 25 c, v dd = 5.0 v, i dd = 59 ma (based on bom in table 3, tuned for optimal linearity with over temperature) figure 18. p1db and quiescent current with diff erent r1 [1] figure 19. p1db and quiescent current with diff erent r2 [1] note: 1. vbias and vctrl can be externally controlled by change external biasing resistors r1 = rbias and r2 = rctrl (as shown in fig . 46). 20.58 20.60 20.62 20.64 20.66 20.68 680 750 820 910 1000 r1 ( : ) 54 55 56 57 58 59 60 61 62 63 64 idd (ma) 20.3 20.4 20.5 20.6 20.7 20.8 20.9 820 910 1000 1100 1200 r2 ( : ) p1db (dbm) p1db (dbm) 52 54 56 58 60 62 64 idd (ma) p1db at r2 = 1000 : current at r2 = 1000 : p1db at r1 = 820 : current at r1 = 820 :
7 mga-31816 application circuit data for 2.6 ghz t c = 25 c, v dd = 5.0 v, i dd = 59 ma (based on bom in table 3, tuned for optimal linearity with over temperature) figure 20. oip3 vs pin and temperature figure 21. oip3 vs frequency and temperature figure 22. gain vs frequency and temperature figure 23. irl vs frequency and temperature figure 24. orl vs frequency and temperature figure 25. isolation vs frequency and temperature 30 31 32 33 34 35 36 37 38 39 40 41 42 43 -20 -19 -18 -17 -16 -15 -14 -13 -12 -11 -10 -9 -8 -7 pin (dbm) oip3 (dbm) 33 34 35 36 37 38 39 40 41 42 43 44 2300 2400 2500 2600 2700 2800 2900 frequency (mhz) oip3 (dbm) 16 17 18 19 20 2300 2400 2500 2600 2700 2800 2900 frequency (mhz) gain (db) 2300 2400 2500 2600 2700 2800 2900 frequency (mhz) -8 -32 -30 -28 -26 -24 -22 -20 -18 -16 -14 -12 -10 input return loss (db) -29 -28 -27 -26 -25 2300 2400 2500 2600 2700 2800 2900 frequency (mhz) isolation (db) -9 -8 -7 -6 -5 -4 -3 -14 -13 -12 -11 -10 2300 2400 2500 2600 2700 2800 2900 frequency (mhz) output return loss (db) 25 c -40 c 85 c 25 c -40 c 85 c 25 c -40 c 85 c 25 c -40 c 85 c 25 c -40 c 85 c 25 c -40 c 85 c
8 mga-31816 application circuit data for 2.6 ghz t c = 25 c, v dd = 5.0 v, i dd = 59 ma (based on bom in table 3, tuned for optimal linearity with over temperature) figure 26. p1db vs frequency and temperature figure 27. noise figure vs frequency and temperature figure 28. current vs voltage and temperature figure 29. oip3 and quiescent current with diff erent r1 [1] figure 30. oip3 and quiescent current with diff erent r2 [1] note: 1. vbias and vctrl can be externally controlled by change external biasing resistors r1 = rbias and r2 = rctrl (as shown in fig . 46). oip3 at r2 = 620 : current at r2 = 620 : 19.0 19.2 19.4 19.6 19.8 20.0 20.2 2300 2400 2500 2600 2700 2800 2900 frequency (mhz) p1db (dbm) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2300 2400 2500 2600 2700 2800 2900 frequency (mhz) noise figure (db) 40.0 40.5 41.0 41.5 42.0 42.5 43.0 43.5 44.0 44.5 510 560 620 680 750 r2 ( : ) oip3 (dbm) 56 57 58 59 60 61 62 63 64 65 idd (ma) 40.0 40.5 41.0 41.5 42.0 42.5 43.0 1000 1100 1200 1300 1500 r1 ( ? ) oip3 (dbm) 54 56 58 60 62 64 66 idd (ma) 1.0 1.4 1.8 2.2 2.6 3.0 3.4 3.8 4.2 4.6 5.0 5.4 voltage (v) 0 10 20 30 40 50 60 70 80 90 idd (ma) 25 c -40 c 85 c 25 c -40 c 85 c 25 c -40 c 85 c oip3 at r2 = 620 : current at r2 = 620 : oip3 at r1 = 1.2 k : current at r1 = 1.2 k :
9 mga-31816 application circuit data for 2.6 ghz t c = 25 c, v dd = 5.0 v, i dd = 59 ma (based on bom in table 3, tuned for optimal linearity with over temperature) figure 31. p1db and quiescent current with diff erent r1 [1] figure 32. p1db and quiescent current with diff erent r2 [1] note: 1. vbias and vctrl can be externally controlled by change external biasing resistors r1 = rbias and r2 = rctrl (as shown in fig . 46). 19.0 19.1 19.2 19.3 19.4 19.5 19.6 1000 1100 1200 1300 1500 r1 ( : ) p1db (dbm) 54 56 58 60 62 64 66 idd (ma) 19.2 19.3 19.4 19.5 19.6 510 560 620 680 750 r2 ( : ) p1db (dbm) 56 57 58 59 60 61 62 63 64 idd (ma) p1db at r2 = 620 : current at r2 = 620 : p1db at r1 = 1.2 k : current at r1 = 1.2 k :
10 mga-31816 application circuit data for 3.5 ghz t c = 25 c, v dd = 5.0 v, i dd = 59 ma (based on bom in table 3, tuned for optimal linearity with over temperature) figure 33. oip3 vs pin and temperature figure 34. oip3 vs frequency and temperature figure 35. gain vs frequency and temperature figure 36. irl vs frequency and temperature figure 37. orl vs frequency and temperature figure 38. isolation vs frequency and temperature -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 -4 3200 3300 3400 3500 3600 3700 3800 frequency (mhz) output return loss (db) -31 -30 -29 -28 -27 3200 3300 3400 3500 3600 3700 3800 frequency (mhz) isolation (db) 16 17 18 19 20 3200 3300 3400 3500 3600 3700 3800 frequency (mhz) gain (db) 3200 3300 3400 3500 3600 3700 3800 frequency (mhz) -8 -6 -24 -22 -20 -18 -16 -14 -12 -10 input return loss (db) 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 -20 -19 -18 -17 -16 -15 -14 -13 -12 -11 -10 -9 -8 -7 pin (dbm) oip3 (dbm) 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 3200 3300 3400 3500 3600 3700 3800 frequency (mhz) oip3 (dbm) 25 c -40 c 85 c 25 c -40 c 85 c 25 c -40 c 85 c 25 c -40 c 85 c 25 c -40 c 85 c 25 c -40 c 85 c
11 mga-31816 application circuit data for 3.5 ghz t c = 25 c, v dd = 5.0 v, i dd = 59 ma (based on bom in table 3, tuned for optimal linearity with over temperature) figure 39. p1db vs frequency and temperature figure 40. noise figure vs frequency and temperature figure 41. current vs voltage and temperature figure 42. oip3 and quiescent current with diff erent r1 [1] figure 43. oip3 and quiescent current with diff erent r2 [1] note: 1. vbias and vctrl can be externally controlled by change external biasing resistors r1 = rbias and r2 = rctrl (as shown in fig . 46). 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3200 3300 3400 3500 3600 3700 3800 frequency (mhz) noise figure (db) 17.8 18.0 18.2 18.4 18.6 18.8 19.0 19.2 19.4 3200 3300 3400 3500 3600 3700 3800 frequency (mhz) p1db (dbm) 25 c -40 c 85 c 25 c -40 c 85 c 0 10 20 30 40 50 60 70 80 90 1.0 1.4 1.8 2.2 2.6 3.0 3.4 3.8 4.2 4.6 5.0 5.4 voltage (v) idd (ma) 38.0 38.5 39.0 39.5 40.0 40.5 41.0 41.5 42.0 42.5 43.0 43.5 44.0 910 1000 1100 1200 1300 r1 ( : ) oip3 (dbm) 52 53 54 55 56 57 58 59 60 61 62 63 64 idd (ma) oip3 at r2 = 820 : current at r2 = 820 : 25 c -40 c 85 c 36.5 37.0 37.5 38.0 38.5 39.0 39.5 40.0 40.5 41.0 41.5 42.0 680 750 820 910 1000 r2 ( : ) oip3 (dbm) 53 54 55 56 57 58 59 60 61 62 63 64 idd (ma) oip3 at r1 = 1.1 k : current at r1 = 1.1 k :
12 mga-31816 application circuit data for 3.5 ghz t c = 25 c, v dd = 5.0 v, i dd = 59 ma (based on bom in table 3, tuned for optimal linearity with over temperature) figure 44. p1db and quiescent current with diff erent r1 [1] figure 45. p1db and quiescent current with diff erent r2 [1] note: 1. vbias and vctrl can be externally controlled by change external biasing resistors r1 = rbias and r2 = rctrl (as shown in fig . 46). 19.0 19.1 19.2 19.3 19.4 r1 ( : ) p1db (dbm) 55 56 57 58 59 60 61 62 63 idd (ma) 18.8 18.9 19.0 19.1 19.2 19.3 19.4 19.5 19.6 680 750 820 910 1000 r2 ( : ) p1db (dbm) 55 56 57 58 59 60 61 62 63 idd (ma) 910 1000 1100 1200 1300 p1db at r2 = 820 : current at r2 = 820 : p1db at r1 = 1.1 k : current at r1 = 1.1 k :
13 application circuit description and layout figure 46. circuit diagram figure 47. demoboard table 3. bill of materials C tuned for optimal linearity performance at diff erent frequencies circuit symbol size description for 1900 mhz manufacturer for 2600 mhz manufacturer for 3500 mhz manufacturer value value value c2 0402 18 pf murata 12 pf murata 5 pf murata c3 0603 2.2 ? f murata 2.2 ? f murata 2.2 ? f murata c11 0402 nr nr 5 pf murata 1 pf murata c13 0402 1.8 pf murata 0.75 pf murata 1.8 pf murata c14 0402 1 pf murata nr nr 1.8 nh murata c15 0402 nr nr nr nr 0.7 pf murata l1 0402 1.8 ph murata 0 ? koa 0 ? koa l2 0402 1.3 pf murata 0.8 pf murata 0.6 pf murata r1 [1] 0402 820 ? koa 1.2 k ? koa 1.1 k ? koa r2 [1] 0402 1 k ? koa 620 ? koa 820 ? koa notes: nr C not required in actual pcb design 1. r1 and r2 can be varied to bias vbias and vctrl which will provide fl exibility to have the product operates at desirable idd, lfom, oip3 drift across temperature and p1db. 2. capacitor is use at l2 and inductor is use at c14 for 3500mhz. figure 48. circuit to measure de-embedded s-parameters and noise parameter in table 4 and 5. note: 1. measurements are conducted on 0.010 inch think roger 4350. the? input reference plane is at the end of the rfin pin and the output? reference plane is at the end of the rfout pin as shown in figure 48. vdd rk_v3.0 out c3 c1 c2 r2 l1 c14 c13 oct 2010 qfn3x3 r1 c11 in l2 c12 avago technologies gnd c15 50 : bias t biasing network rf out rf in vbias vctrl 50 : 50 : vd bias t bias t rfout biasing network rfin vbias vctrl vdd c11 c13 c15 c3 c1 pin 10 pin 3 pin 11 pin 13 pin 15 pin 16 r1 r2 l1 c14 l2
14 table 4. mga-31816 typical scattering parameters t c = 25 c, v dd = 5.0 v, i dd = 59 ma, z o = 50 ? (data is de-embedded to the rfin & rfout pins on package. measurements were made with bias-t at v dd , v ctrl and v bias in figure 48) freq ghz s11 s11 s11 s21 s21 s21 s12 s12 s12 s22 s22 s22 k factor mag. db ang. mag. db ang. mag. db ang. mag. db ang. 0.10 0.919 -0.7 163.7 0.250 -12.0 -79.9 0.001 -57.2 143.7 0.781 -2.2 152.0 87.589 0.20 0907 -0.8 147.4 0.776 -2.2 -80.7 0.005 -46.8 98.7 0.754 -2.5 122.7 11.054 0.30 0.890 -1.0 131.3 1.603 4.1 -95.7 0.008 -41.5 88.2 0.721 -2.9 93.1 4.096 0.40 0.862 -1.3 114.9 2.659 8.5 -115.4 0.014 -36.9 69.8 0.673 -3.4 63.1 2.276 0.50 0.823 -1.7 98.6 3.832 11.7 -137.1 0.021 -33.6 50.8 0.614 -4.2 32.3 1.693 0.60 0.773 -2.2 82.4 5.011 14.0 -159.4 0.027 -31.3 30.9 0.550 -5.2 1.5 1.452 0.70 0719 -2.9 67.3 6.091 15.7 178.8 0.033 -29.5 10.8 0.486 -6.3 -29.1 1.315 0.80 0.664 -3.6 52.6 7.020 16.9 157.5 0.038 -28.4 -8.3 0.429 -7.4 -59.4 1.245 0.90 0.607 -4.3 38.9 7.769 17.8 137.0 0.042 -27.5 -26.6 0.379 -8.4 -88.7 1.204 1.00 0.558 -5.1 25.8 8.334 18.4 117.4 0.045 -26.9 -43.8 0.340 -9.4 -117.1 1.178 1.10 0.511 -5.8 13.4 8.791 18.9 98.9 0.048 -26.4 -61.1 0.309 -10.2 -143.6 1.158 1.20 0.472 -6.5 1.6 9.137 19.2 80.9 0.050 -26.1 -76.6 0.286 -10.9 -169.0 1.147 1.30 0.435 -7.2 -10.2 9.413 19.5 63.7 0.051 -25.8 -92.4 0.265 -11.5 167.3 1.140 1.40 0.403 -7.9 -21.3 9.626 19.7 46.9 0.052 -25.6 -107.2 0.251 -12.0 145.0 1.131 1.50 0.372 -8.6 -32.5 9.773 19.8 30.7 0.053 -25.5 -121.4 0.237 -12.5 124.1 1.131 1.60 0.346 -9.2 -42.9 9.882 19.9 14.8 0.054 -25.4 -135.6 0.225 -12.9 104.4 1.132 1.70 0.318 -9.9 -53.3 9.992 20.0 -1.0 0.054 -25.4 -149.5 0.216 -13.3 85.6 1.133 1.80 0.296 -10.6 -62.6 10.040 20.0 -16.4 0.054 -25.4 -163.2 0.205 -13.8 67.3 1.138 1.90 0.274 -11.3 -71.6 10.066 20.1 -31.6 0.054 -25.3 -176.0 0.193 -14.3 49.9 1.143 2.00 0.253 -12.0 -79.9 10.101 20.1 -46.7 0.054 -25.3 170.4 0.184 -14.7 33.7 1.145 2.10 0.237 -12.5 -87.0 10.090 20.1 -61.6 0.054 -25.3 157.8 0.174 -15.2 17.1 1.149 2.20 0.221 -13.1 -94.0 10.079 20.1 -76.4 0.054 -25.4 145.0 0.164 -15.7 1.8 1.158 2.30 0.210 -13.6 -98.8 10.056 20.1 -91.1 0.054 -25.4 131.7 0.154 -16.3 -13.4 1.165 2.40 0.204 -13.8 -103.1 9.969 20.0 -105.7 0.053 -25.5 119.4 0.144 -16.8 -27.1 1.179 2.50 0.204 -13.8 -107.9 9.922 20.0 -120.2 0.053 -25.6 107.0 0.133 -17.5 -41.6 1.183 3.00 0.254 -11.9 -134.8 9.361 19.4 168.2 0.049 -26.3 45.9 0.075 -22.5 -89.7 1.247 3.50 0.352 -9.1 -178.6 8.510 18.6 98.1 0.043 -27.3 -12.9 0.084 -21.5 -79.3 1.338 4.00 0.448 -7.0 129.0 7.488 17.5 29.9 0.037 -28.7 -68.6 0.181 -14.8 -117.4 1.488 5.00 0.582 -4.7 14.5 5.425 14.7 -100.9 0.028 -31.2 -170.5 0.358 -8.9 130.6 1.885 6.00 0.677 -3.4 -104.3 3.873 11.8 135.0 0.023 -32.8 97.5 0.431 -7.3 16.2 2.316 7.00 0.749 -2.5 139.9 2.729 8.7 15.0 0.023 -32.9 8.0 0.467 -6.6 -99.4 2.491 8.00 0.787 -2.1 30.3 1.913 5.6 -99.7 0.022 -33.1 -90.8 0.495 -6.1 146.2 3.046 9.00 0.799 -2.0 -75.6 1.398 2.9 148.5 0.024 -32.3 173.1 0.526 -5.6 36.4 3.452 10.00 0.794 -2.0 178.9 1.046 0.4 38.7 0.026 -31.6 71.8 0.549 -5.2 -70.1 4.257 11.00 0.797 -2.0 70.7 0.812 -1.8 -70.3 0.028 -31.0 -30.6 0.546 -5.3 -173.8 5.165 12.00 0.816 -1.8 -37.9 0.629 -4.0 -179.6 0.030 -30.6 -136.3 0.526 -5.6 78.1 6.052 13.00 0.827 -1.7 -139.4 0.470 -6.6 72.4 0.029 -30.9 116.0 0.535 -5.4 -35.5 7.992 14.00 0.829 -1.6 125.2 0.358 -8.9 -28.5 0.024 -32.4 27.4 0.567 -4.9 -146.5 11.988 15.00 0.801 -1.9 22.2 0.311 -10.1 -134.6 0.029 -30.7 -80.8 0.601 -4.4 110.9 12.115 16.00 0.790 -2.1 -91.7 0.249 -12.1 113.3 0.030 -30.4 166.6 0.619 -4.2 4.7 14.902 17.00 0.810 -1.8 162.7 0.163 -15.8 0.5 0.025 -32.2 50.9 0.661 -3.6 -111.2 23.713 18.00 0.824 -1.7 68.3 0.071 -22.9 -99.0 0.013 -37.6 -50.7 0.728 -2.8 130.8 79.608 19.00 0.820 -1.7 -27.4 0.047 -26.6 -95.2 0.007 -43.2 -78.2 0.788 -2.1 12.8 193.344 20.00 0.809 -1.8 -130.0 0.152 -16.3 151.9 0.033 -29.7 -165.6 0.676 -3.4 -103.2 19.267
15 mga-31816 stability t c = 25 c, v dd = 5.0 v, i dd = 59 ma, z o = 50 ? (data is de-embedded to the rfin & rfout pins on package. measurements were made with bias-t at v dd , v ctrl and v bias in figure 48) figure 49. k-factor vs frequency table 5. mga-31816 typical noise parameters t c = 25 c, v dd = 5.0 v, i dd = 59 ma, z o = 50 ? (data is de-embedded to the rfin & rfout pins on package. measurements were made with bias-t at v dd , v ctrl and v bias in figure 48) freq (ghz) f min (db) ? opt mag ? opt ang r n /z 0 ga (db) 0.5 3.52 0.805 -152.5 0.2802 18.93 0.8 2.15 0.65 -142.8 0.181 20.34 0.9 1.92 0.617 -140.5 0.1648 20.50 1.0 1.79 0.586 -140.1 0.1554 20.61 1.5 1.44 0.49 -132.5 0.1278 20.85 2.0 1.35 0.425 -129.3 0.121 20.82 2.5 1.28 0.385 -125.1 0.118 20.65 3.0 1.29 0.35 -120.4 0.1202 20.43 3.5 1.35 0.38 -121.4 0.128 20.05 4.0 1.48 0.428 -119.9 0.1412 19.64 4.5 1.61 0.477 -118.1 0.151 19.22 5.0 1.82 0.552 -112.5 0.1782 18.80 5.5 2.02 0.599 -99.8 0.203 18.39 6.0 2.22 0.635 -90.4 0.2528 17.98 k factor 0 1 2 3 4 5 6 7 8 9 10 0 2 4 6 8 10 12 14 16 18 20 frequency (ghz) k factor
16 pcb layout and stencil design notes: 1. all dimensions are in milimeters 2. 4mil stencil thickness recommended pcb land pattern (top view) stencil outline combined pcb & stencil layouts chamfer 0.24 1.55 0.23 0.32 0.50 1.55 0.50 ? 0.26 0.56 chamfer 0.06 1.24 1.24 0.49 0.35 0.21 chamfer 0.192 0.50 0.32 1.55 1.24 1.24 1.55 0.23 0.21 0.36 0.50 3.20 2.92 0.50 3.20
17 package dimensions part number ordering information part number no. of devices container MGA-31816-BLKG 100 antistatic bag mga-31816-tr1g 3000 13 tape/reel notes: 1. all dimensions are in milimeters. 2. dimensions are inclusive of plating. 3. dimensions are exclusive of mold fl ash and metal burr. top view side view bottom view 31816 yyww xxxx 3.00 0.10 3.00 0.10 pin 1 dot by marking 0.20 ref. 0.00 0.05 0.40 0.05 1.55 0.05 exp.dap 1.55 0.05 exp.dap 0.50 bsc 0.23 0.05 1.50 ref. pin #1 identification chamfer 0.30 x 45 0.85 0.05
18 device orientation tape dimensions user feed direction top view end view user feed direction cover tape carrier tape reel 31816 yyww xxxx 31816 yyww xxxx 31816 yyww xxxx notes: 1. measured from centerline of sprocket hole to centerline of pocket 2. cumulative tolerance of 10 sprocket holes is 0.20 3. other material available 4. all dimensions in millimeter unless otherwise stated c l 0.3 0.05 3.3 0.1 1.55 0.1 1.6 0.1 r 0.3 typical 1.55 0.05 2.0 0.1 [1] 4.0 0.1 [2] 1.75 0.1 5.5 0.1 [1] 12.0 0.3 3.3 0.1 8.0 0.1
for product information and a complete list of distributors, please go to our web site: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies in the united states and other countries. data subject to change. copyright ? 2005-2012 avago technologies. all rights reserved. av02-3265en - march 8, 2012 reel dimension C 13 reel 12 mm width ps 6 2 1 12 11 10 9 8 7 2 0 3 5 4 6 6 ps ps 6 cpn 12mm mpn detail "x" recycle logo see detail "x" r19.00.5 ?12.30.5(3x) ?100.00.5 ?329.01.0 11.9-15.4** 18.4 max.* slot 5.00.5 (3x) 12.4 +2.0* -0.0 embossed lettering 16.0 mm height x min. 0.4 mm thick. embossed line (2x) 89.0 mm length lines 147.0 mm away from center point embossed lettering 7.5 mm height date code esd logo ?16.0 embossed lettering 7.5 mm height hub ?100.00.5 ?329.01.0 20.2 (min.) 1.5 (min.) ?13.0 +0.5 -0.2 back view front view 2 0 12 10 8 7 11 9 1 3 4 6 5 2

▲Up To Search▲

Price & Availability of MGA-31816-BLKG

	To Download MGA-31816-BLKG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .